| CBL216 | ¼ – 28 4-pin to 4-pin mini connector for SEN026 |
| CBL217 | ¼ – 28 4-pin to ¼ – 28 4-pin, 5 ft (1.5m) cable |
| CBL237 | ¼ – 28 4-pin to three 10-32 plugs for SEN033 cable. Available in 5, 10 & 20 ft (1.5, 3 & 6 m) |
| SEN026 | Triaxial accelerometer, 10 mV/g, ICP, 1 to 9000 Hz, 8-36 4-pin connector. Use with ADP063 for palm measurements. |
| SEN027 | Seat pad accelerometer, 100 mV/g, ICP, 0.5 to 1000 Hz, 1/4 - 28 4-pin connector |
| SEN033 | Single axis seismic accelerometer, 1000 mV/g, ICP, 50 gm, 0.06 to 450 Hz, 10-32 top connector with TEDS. Use with CBL237 |
| SEN034 | Triaxial accelerometer for seismic, 1000 mV/g, ICP, 0.5 to 3000 Hz, ¼ – 28 4-pin connector with TEDS. Use with CBL217 |
| SEN040F | Triaxial accelerometer, 0.1 mV/g, ICP, 2 to 4000 Hz, 1/4 - 28 4-pin connector. Use with ADP080A, 81A, or 82A |
| SEN041F | Triaxial accelerometer, 1 mV/(m/s2). Use with ADP080A, 81A, or 82A |
| CCS047 | Hard shell case for HVM200 and accessories |
| CCS048-S | Small arm band for HVM200, fits arm circumference of 8 in to 12.5 in (20 to 32 cm) |
| CCS048-L | Large arm band for HVM200, fits arm circumference of 10.5 in to 16.5 in (27 to 42 cm) |
| REF2510R | Hand-held vibration reference source, user-selectable operating frequency and measurement type, 1.0 g (9.81 m/s2) at 61.4 Hz, 100.0 Hz, or 159.2 Hz |
| 394C06 | Hand-held shaker, 1.0 g (9.81 m/s2)at 159.2 Hz |
| CER-HVM200 | Factory calibration of HVM200, does not include sensor |
| ADP081A | Adaptor for accelerometer held to side of hand |
| ADP080A | Adaptor for accelerometer held between fingers |
| ADP082A | Adaptor for accelerometer clamped to handle of a machine |
| ADP063 | Adaptor for accelerometer at the palm under a glove |
